Atop ABLELink MB5000 Series Manual do Utilizador

ABLELink® Modbus Gateway MB5000 Series User’s Manual Version 1.1 Updated in March, 2010 TEL: 886-3-5508137 FAX: 886-3-5508131 http://www.

User manual Version 1.0 Modbus Gateway Configuration and Management Connecting to the Setup Page There are two methods of connecting to the Modbus

User manual Version 1.0 Modbus Gateway System information The menu tree to the left side of the page contains the configuration and management opti

User manual Version 1.0 Modbus Gateway Login If nothing is modified after connecting to the Modbus Gateway, the user does not have to be logged in.

User manual Version 1.0 Modbus Gateway Port information The Port Information menu can browse through and modify the settings of all ports, includin

User manual Version 1.0 Modbus Gateway Port [Port] will configure the basic parameters and connection information to the Modbus Gateway. There are t

User manual Version 1.0 Modbus Gateway Serial Device Mode Modbus devices are commonly labeled as Master and Slave and therefore, the Serial Devic

User manual Version 1.0 Modbus Gateway connected to the port. For example, Port1 connected device uses the Modbus RTU communication protocol then “D

User manual Version 1.0 Modbus Gateway ID routing-table: Master ID and Slave ID modes. Master ID: The Master ID is a virtual ID and each field

User manual Version 1.0 Modbus Gateway (II) “Serial Device Mode” as “Master” Figure 2. Configuration page for “Serial Device Mode” as “Master”

User manual Version 1.0 Modbus Gateway “Slave IP”: IP address for connecting to remote slave device. “Slave TCP Port”: TCP port for connecting to

User manual Version 1.0 Modbus Gateway Table of Contents Table of Contents...

User manual Version 1.0 Modbus Gateway Miscellaneous The miscellaneous menu includes the [Basic settings] and [Advanced settings] for the Modbus Ga

User manual Version 1.0 Modbus Gateway Advance settings There are two main functions in the advanced settings, (1) Enable and disable Modbus Gatewa

User manual Version 1.0 Modbus Gateway Import Setting: Click “Browse” and select the configuration file to recover the Modbus Gateway, then click .

User manual Version 1.0 Modbus Gateway Network Settings The Modbus Gateway features two network devices that can be configured. After carefully conf

User manual Version 1.0 Modbus Gateway Log Lookup the system or communication logs. System log The system log will record the startup, shutd

User manual Version 1.0 Modbus Gateway Communication log has three sections, Serial, Ethernet, and Unidentifiable. Serial: Includes three fields,

User manual Version 1.0 Modbus Gateway Click on upper left “Refresh” to refresh the contents, click “Close” to close this log window. This exam

User manual Version 1.0 Modbus Gateway Warm Start Warm Start is rebooting the Modbus Gateway without cutting off the power. The Reboot option or cut

User manual Version 1.0 Modbus Gateway Reboot Reboot the Modbus Gateway system and all modified settings will be applied after the reboot.

User manual Version 1.0 Modbus Gateway Configuration Examples Example 1: Serial Port to Slave Device Two serial ports connecting to different serial

User manual Version 1.0 Modbus Gateway Configuration Examples...

User manual Version 1.0 Modbus Gateway After the Parameter has been configured, select the “Serial Device Mode” function menu for Port1. Port1 “S

User manual Version 1.0 Modbus Gateway Then we will configure the ID Routing between ID 1-10 of Port1 and ID 1-10 of Port2, where the Master ID will

User manual Version 1.0 Modbus Gateway After the Parameter has been configured, select the “Serial Device Mode” function menu for Port2. Port2 “Ser

User manual Version 1.0 Modbus Gateway Then we will configure the ID Routing between ID 1-10 of Port1 and ID 1-10 of Port2, where the Master ID 1-10

User manual Version 1.0 Modbus Gateway Port1 settings: Configure the port parameters: Port1 uses RS485 and should be set in the Hardware Mode o

User manual Version 1.0 Modbus Gateway (1) Configure Slave A: Set the IP address and TCP Port of Slave A, as well as ID range for Slave A. Enter

User manual Version 1.0 Modbus Gateway (2) Configure Slave B: Set the IP address and TCP Port of Slave B, as well as ID range for Slave B. Enter

User manual Version 1.0 Modbus Gateway and 2.

User manual Version 1.0 Modbus Gateway Introduction Modbus is an industry adopted communication protocol based on RTU, ASCII, and TCP protocols for

User manual Version 1.0 Modbus Gateway Features  Supports the four most commonly used hardware communication interfaces in the industry, RS232, RS

User manual Version 1.0 Modbus Gateway Specifications Specifications Model MB5302 (2-Port) MB5404 (4-Port) System CPU RISC 150MHZ Processor wit

User manual Version 1.0 Modbus Gateway Hardware Diagram Diagram 2-Port Hardware Diagram 4-Port Hardware Diagram

User manual Version 1.0 Modbus Gateway Pin Definitions Power Pin Definitions 2-Port Power Pin Definitions (DC) DC 9V - DC 30V Ethernet Port Pi

User manual Version 1.0 Modbus Gateway Serial Port Pin Definitions 2-Port and 4-Port Pin Definitions (DB9) RS-232 RS-422 RS-485 Pin Signal P